|
|
|
|
|
|
|
|
|
|
|
|
|
|
ProSportHD Generation 4 On-Board Marine Battery Chargers incorporate all-digital microprocessor control. The ProSportHD Series provides unique automatic installation feedback with its exclusive "System Check OK" and individual "Battery Bank Trouble" LED indicators which eliminate time consuming troubleshooting by clearly indicating system and battery connections are OK, or if a fault is present on a specific battery bank. After fully charging and conditioning batteries, ProSport’s Energy Saver Mode will monitor and automatically maintain batteries in a full state of charge, resulting in maximum reserve power performance and lower AC power consumption and operating costs. ProSport incorporates Distributed-On-Demand™ Charging technology, taking 100% of the available charging amps and distributing them to any one or a combination of all batteries as needed for faster charging. Each ProSport model has 4 digitally selectable charge profiles including a once-a-month storage reconditioning mode for extending battery life.
The 12 Amp model is adequate for most systems with 2 battery banks each having 1 or 2 standard size batteries, for faster charging on larger battery banks choose the 20 Amp model.
|
Automatically Combines or Isolates Battery Banks, no more old fashioned 1, 2, Both switch!
This convenient and affordable kit gives you both an automatic charging relay and a dual purpose battery disconnect switch. The simple to use switch has 3 positions, OFF, ON, and COMBINED. OFF disconnects all loads from BOTH the engine and house batteries. ON connects the engine to the engine battery and the house loads to the house battery. Combined connects both batteries together to all loads to allow emergency engine starting from the house battery. Before now it took 3 switches and a bunch of wiring to provide these functions. The Automatic Charging Relays combines batteries during charging, but keeps them separated when not charging and during engine cranking (optionally), to protect sensitive electronics.
|
Get all your LED running lights together in one package and save a few dollars. This will include 3 LED bulbs, one for the stern light, steaming light and bow light.
Note that early 26X boats with the deck mounted bow and stern lights will need to select that option. The deck mounted lights use a different, smaller Aqua Signal series 20 bulb.
Please click over to "extended information" right above this description if you want to see more detailed information and specs on the LED bulbs.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Automatically Combines or Isolates Battery Banks
The Mini Automatic Charging Relay (M-ACR) is designed to manage the charging current from alternators up to 65 Amps found on most outboards and many inboard engines to 2 battery banks. Start Isolation (SI) protects sensitive digital electronics with stored memory settings by temporarily isolating house loads from the engine starting circuit during engine cranking, protecting electronics from voltage sags and spikes. The compact design allows for three mounting styles: surface, rear, or panel mount.
|
All vessels are required to display a white light visible in all directions whenever they are moored or anchored outside a designated mooring area between sunset and sunrise.
LED fixed mount all-around lighst are approved for USCG 2 nm (Colreg 2 mile). 12 Volt DC. Injection molded nylon/chrome plated zinc. Extremely low power draw.
Add an optional plug and pre-cut wire to plug this into your existing masthead (steaming) light socket (you won't need that one plugged in when you're anchoring!) NOTE: The old style deck plug used on most Mac boats until about 2009 is no longer available, you will have to change the boat half of the connector as well as the plug on the existing steaming light. The wire and plug option includes one complete connector assembly and one plug only. If you have a newer 26M with the new style connector (white plastic cover flap), you will not need to change the boat side of the connector.
Note: Because of the way the foam was inserted into the larger 26M masts (2003-2007) you will not be able to feed the wire through that mast to install lights or antennas at the masthead.
|
This is the new style 4 position fuse panel used from 1997 through 2013 and current. The 26 Classic 3 position square panel is no longer available.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Navigation Light Requirements
Under sail at
night, light requirements:
The operator of a sailboat operating under sails at night
shall, from sunset to sunrise, display: sidelights (red - green) and. sternlight
(white). If less than 20 meters in length, the three lights may be combined at
or near the top of the mast.
Under power at night, light requirements:
The red light indicates a vessel's port (left) side; the
green indicates a vessel's starboard (right) side. Sternlight: This white light
is seen only from behind or nearly behind the vessel. Masthead Light: This
white light shines forward and to both sides and is required on all
power-driven vessels.
For use on masthead lights and stern lights, will work with any light except Aqua signal series 20 stern lights.
The light facing forward on the mast just below the
spreaders is the masthead light, for motoring at night.
• Tight fitting end caps slide to expand or contract the length of the bulb to fit many fixtures
• Highest quality components - really!
• High light output
• Reduces energy consumption — current draw of only about 0.1A
• Incredibly reliable — usually never need replacing
|
Some boats had lights mounted on the deck, some had lights on the transom with screw on lenses, some were mounted on the transom with snap on lenses. be sure to check what you are replacing.
If you'd like to add an LED Upgrade bulb you can add it as an option to this part, or use separate part number 8404-1V0
|
LATE MODEL X AND ALL 26M, also as a replacement for the no longer manufactured 8305-1V1.
If you'd like to add an LED Upgrade bulb you can add it as an option to this part, or use separate part number 8404-1V0
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
This screw-in style 4 pin connector should be more secure than the factory 2 pin. The mounting holes will not line up perfectly but should line up enough to make it work, or just secure it to the deck with some good marine sealant. Please disregard the picture that only shows 2 pins, this IS a 4 pin connector.
|
snap on lens style bow light, bow rail mounted red / green
If you'd like to add an LED Upgrade bulb you can add it as an option to this part, or use separate part number 8404-1V0
|
This screw-in style 2 pin connector should be more secure than the factory 2 pin. The mounting holes will not line up perfectly but should line up enough to make it work, or just secure it to the deck with some good marine sealant.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Replacement socket, plug (male and female) and white cap for mast light connector used on some 2010 and newer 26M only. This style can be identified by the white color, not black, plastic cap on the socket. Also, the prongs are both the same size, not one larger than the other.
|
This will fit in any of the bayonet style light fixtures for interior lights on MacGregors. These lights are about the same brightness and color of light as the factory incandescent bulbs.
Water tight Silicone Encapsulated BA15 LED. Large on light with but soft on the eyes. Equal to a 20W incandescent. • Latest Chip Technology • Water Tight • 10-30VDC Only, 2 Watt
|
Replacement bulb for aqua signal series 25 mast light, rail mount bow light, and transom mount stern light, series 25, 12V / 10W, Festoon.
This is a replacement bulb for the following part numbers:
8302-1V1
8305-1V1
8306-1V1
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
MAST LIGHT MOUNTING BRACKET FITS ALL MASTS WITH SNAP ON STYLE LIGHT. If your light has a screw on lens, you will need to redrill the mounting holes in the bracket or replace the light also.
|
White plastic rectangle light with large clear lens. Newest style. Original light covers were squared corners. New style is a more sleek design.
If you'd like to add an LED Upgrade bulb you can add it as an option to this part, or use separate part number 8407-1V0
|
metal strap to hold one group 24 battery. BOLTS NOT INCLUDED.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Replacement plug only for the mast light connector. Used on some 2010 and newer 26M only. This style can be identified by the white, not black, plastic cap on the socket. Also, the prongs are the same large size.
|
Fits Hella Bow, Stern, and Mast lights with snap on style lens. Sold as each, not a pair. 12V/110W Festoon
This is a replacement bulb for the following part numbers:
8302-1V38305-1V3
8306-1V3
|
Individual replacement fuse holder for the 4 toggle fuse panel.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
This is the switch replacement for the fuse panel.
|
Not sure what MacGregor parts to get for someone? Give the open ended gift of a Blue Water Yachts gift certificate. They never expire and are good for anything in our online store! Let us know how much you would like for your certificate and we can make it out for any price.
|
This
part is no longer manufactured, you will need to replace the entire
connector with either part #8304-1M3 or the upgraded screw in connector
part #8304-1V4.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
This part is no longer manufactured, you will need to replace the entire connector with either part #8304-1M3 or the upgraded screw in connector part #8304-1V4.
|
This item is no longer manufactured. You will need to use New Style, Full Kit, Part # 8304-1M3 or the upgraded screw in connector, Part #8304-1V4.
|
Screw on lens style bow light, bow rail mounted red / green, NO LONGER MANUFACTURED, use #8302-1V3 snap on lens style. The new style light isa the same size but will require drilling new mounting holes.
If you'd like to add an LED Upgrade bulb you can add it as an option to this part, or use separate part number 8404-1V0
|
|
|
