All vessels are required to display a white light visible in all directions whenever they are moored or anchored outside a designated mooring area between sunset and sunrise.
LED fixed mount all-around lighst are approved for USCG 2 nm (Colreg 2 mile). 12 Volt DC. Injection molded nylon/chrome plated zinc. Extremely low power draw.
Add an optional plug and pre-cut wire to plug this into your existing masthead (steaming) light socket (you won't need that one plugged in when you're anchoring!) NOTE: The old style deck plug used on most Mac boats until about 2009 is no longer available, you will have to change the boat half of the connector as well as the plug on the existing steaming light. The wire and plug option includes one complete connector assembly and one plug only. If you have a newer 26M with the new style connector (white plastic cover flap), you will not need to change the boat side of the connector.
Note: Because of the way the foam was inserted into the larger 26M masts (2003-2007) you will not be able to feed the wire through that mast to install lights or antennas at the masthead.
It includes 12” wire leads for connection to a 12 volt system.
This energy efficient utility light uses approximately 1 amp-hour per night (just 0.11 amps at 12 volts).
It can run continuously for over 2 weeks on a typical 50 amp hour car battery!
• 2 mile visibility
• 100% waterproof O-ring seals lens to base
|