|
|
|
|
|
|
|
|
|
|
|
|
|
.75 Nylon / Tri-radial / Available in red/white or blue/white
Does not include sheets.
|
Also known as a dousing sock or a spinnaker sock. Light grey in color.
Considered the best dousing sock on the market. High quality breathable material. Tangle resistant design. Kevlar funnel, slips easily over spinnaker. Works much better than less expensive designs with a wire hoop.
|
We recommend this telescoping pole (6'-12') for all Macgregor models. While Forespar says to use a larger size, we have found that the larger pole is too heavy to use in light wind without the complexity of a pole lift line. An added benefit is that if you completely lose control of things in a big blow, the plastic end fitting will break, acting as a sort of "fuse". These fittings are inexpensive and easy to replace. We stock these poles with latch fittings on both ends as we have found the "spike" style poles tend to come out of the sail grommet if the sail shakes a lot or goes slack. Instead latch securely onto the leeward sheet.
Everything is included in this kit for all boats except for 26M. If you have a 26M you must add the additional mast padeye bracket.
Because of the length this item ships oversize, and is subject to an additional $25 shipping charge. If we are able to get a cheaper shipping rate we will manually adjust your invoice accordingly.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Complete kit for adding a spinnaker halyard. Includes 66' 5/16" hayard line, mast cleat, and mast tangs with block. Mount mast tang 18"-24" above your headstay tang. Kit includes all stainless mounting hardware. If you have a Tattoo or 26M please use part #3810-1M4. This kit is made for anything older than 2003.
|
Tack pennant, to help keep your spinnaker flying out in front of the bow rail, and two small turning blocks for the spinnaker sheets. The two small blocks attach to your stern rail cleats. Works best on stainless cleats, if you have the black plastic cleats you will need to add a small loop of line through the middle of the cleat to attach the turning blocks to. By sheeting all the way to the stern cleats on your boat you will insure proper sheeting angles for sailing performance.
|
Used to relocate the spinnaker halyard a recommended 18" to 24" above your headstay for flying an assymetrical spinnaker. Includes nuts and bolts. This is the tang set, bolts, and halyard block.
|
|
|
|
|
|
|
|
|
|
|
|
Not sure what MacGregor parts to get for someone? Give the open ended gift of a Blue Water Yachts gift certificate. They never expire and are good for anything in our online store! Let us know how much you would like for your certificate and we can make it out for any price.
|
|
|
