Home > Venture Boat Parts > Venture 23 > Electrical
Sort By:
Page of 1
AUTOMATIC CHARGING RELAY LIGHT, STEAMING/DECK LIGHT COMBO UPGRADE LIGHT, WATERPROOF LED LANTERN
AUTOMATIC CHARGING RELAY
Our Price: $89.99

Automatically Combines or Isolates Battery Banks


The Starting Isolation (SI) Series of Automatic Charging Relays combines batteries during charging, but keeps them separated when not charging and during engine cranking, to protect sensitive electronics.

• 12/24 volt auto ranging voltage input
• Supports high-output alternators up to 120 amperes
• Senses charge source on either battery bank
• Low voltage protection prevents combining a charged battery with a drained one
• Hermetically sealed contacts and vaporproof
• Waterproof rated IP67 - temporary immersion for 30 minutes
• Onboard LED indicates when batteries are combined; output for remote LED
• Ignition protected - safe for installation aboard gasoline powered boats
• 3/8" tin-plated copper studs
• 1/4" male quick connect terminals for ground, remote LED, and starting interrupt
• Dimensions: 3.88"W x 3.50"H x 2.00"D

A Series 25 masthead light and functional halogen foredeck lamp combined into a single fixture. Bulbs are operated independently of each other. • Masthead bulb: 12 volt/10 watts • Foredeck bulb: 12 volt/20 watt halogen • Housing made of rigid, saltwater resistant and non-magnetic polycarbonate • 2 hole mounting on flexible flange which wraps around mast • USCG certified; 2 nautical mile visibility • Dimensions: 7"W x 5.5"H x 2.4"D

From Blackfire the leader in innovation in flashlights comes Clamplight Lantern. It is the first and only lantern able to clamp to branches, tents and back packs and boats. Perfect for backyard barbeques, lighting workspaces, and during blackouts. It locks open to stand when there is nothing to clamp to. The head articulates to get light where you need it. It also can be used as a flashlight. Clamplight Lantern, like no other flashlight in the world.

ANCHOR LIGHT, HOIST-UP ANCHOR LIGHT, MASTHEAD MOUNT NAVIGATION LIGHT, LED BULB. SERIES 25, EACH
ANCHOR LIGHT, HOIST-UP
Our Price: $39.99

It includes a 15 ft cable with a strain-relief and a convenient, fused, cigarette lighter plug.It also includes an adjustable hanging bracket for hanging on a hook, line, boom or awning.


LED fixed mount all-around lighst are approved for USCG 2 nm (Colreg 2 mile). 12 Volt DC. Injection molded nylon/chrome plated zinc. Extremely low power draw.

Add an optional plug and pre-cut wire to plug this into your existing masthead (steaming) light socket (you won't need that one plugged in when you're anchoring!)

Note: Because of the way the foam was inserted into the larger 26M masts (2003-2007) you will not be able to feed the wire through that mast.
Please use part #8313-1V0

For use on masthead lights and stern lights, will work with any light except Aquasignal series 20 stern lights.

• Tight fitting end caps slide to expand or contract the length of the bulb to fit many fixtures
• Highest quality components - really!
• High light output
• Reduces energy consumption — current draw of only about 0.1A
• Incredibly reliable — usually never need replacing
• Note: White LED bulbs should not be used behind colored lenses in nav lights, as they will not produce the required brightness; only the corresponding colored LEDs should be used in nav lights with colored lenses
LIGHT, TRAILER, TAIL, LED, RIGHT LIGHT, TRAILER, TAIL, LED, LEFT LIGHT, WATERPROOF LED CLAMPLIGHT

Replace your trailer lights with newer and brighter LED tail lights that are more reliable and more visible. Right side is curbside light. These lights match the more square style lights on newer 26M trailers but will fit properly as a replacement on any MacGregor Trailer.

The matching trailer light for the other side can be found here.

Replace your trailer lights with newer and brighter LED tail lights that are more reliable and more visible. Left side is the street side. These lights match the more square style lights on newer 26M trailers but will fit properly as a replacement on any MacGregor trailer.

The matching trailer light for the other side can be found here.

From Blackfire the leader in innovation in flashlights comes Clamplight Lantern. It is the first and only lantern able to clamp to branches, tents and back packs and boats. Perfect for backyard barbeques, lighting workspaces, and during blackouts. It locks open to stand when there is nothing to clamp to. The head articulates to get light where you need it. It also can be used as a flashlight. Clamplight Lantern, like no other flashlight in the world.

DECK PLUG, SCREW-IN, 4 PIN DECK PLUG, SCREW-IN, 2 PIN BULB, REPLACEMENT, AQUA SIGNAL, SERIES 25, EACH
This screw-in style 4 pin connector should be more secure than the factory 2 pin. The mounting holes will not line up perfectly but should line up enough to make it work, or just secure it to the deck with some good marine sealant. Please disregard the picture that only shows 2 pins, this IS a 4 pin connector. This screw-in style 2 pin connector should be more secure than the factory 2 pin. The mounting holes will not line up perfectly but should line up enough to make it work, or just secure it to the deck with some good marine sealant.
Replacement bulb for aqua signal series 25 mast light, rail mount bow light, and transom mount stern light, series 25, 12V / 10W, Festoon.

This is a replacement bulb for the following part numbers:
8302-1V1
8305-1V1
8306-1V1


BATTERY STRAP, STAINLESS SWITCH, FUSE PANEL REPLACEMENT Gift Certificate
BATTERY STRAP, STAINLESS
Our Price: $11.00

metal strap to hold one group 24 battery. BOLTS NOT INCLUDED.

This is the switch replacement for the fuse panel.

Not sure what MacGregor parts to get for someone? Give the open ended gift of a Blue Water Yachts gift certificate. They never expire and are good for anything in our online store! Let us know how much you would like for your certificate and we can make it out for any price.