Home > Venture Boat Parts > Venture 24/224 > Deck
Sort By:
Page of 2
WINCH KIT, SAIL, LEWMAR, (2 WINCHES) WINCH KIT, SAIL, FORESPAR ANCHOR LINE, 3/8" x 150'
WINCH KIT, SAIL, FORESPAR
Our Price: $208.00
ANCHOR LINE, 3/8" x 150'
Our Price: $91.00

Direct replacement for all boats since mid 1980's, premium upgrade for earlier boats or late model 26M with plastic Forespar winches. Includes two winches. Does not include winch handle. Order #4504-110 winch handle if you need a new one.

The bronze winches are a nice upgrade, offering the same reliable functionality with a more traditional aesthetic. If you upgrade to the bronze winches please allow an extra few weeks for shipment, as they are a special order for us and take some time to get.

Basic, Economical replacement for all boats since mid 1980's (came with Lewmar Aluminum #6's) - upgrade for earlier boats with out of date winches. This winch may be replaced with the Marelon winch by forespar, as this one may no longer be made.

• 3-strand, premium nylon construction provide excellent elongation to help minimize the shock load effects of waves and wind on deck hardware • Thimble will not rust or chafe in the line, and may be attached to any galvanized or stainless shackle for use with anchors or chain
• Sizes 3/8" x 100 ft through 1/2" x 150 ft are supplied in a reusable plastic tote box; larger sizes are supplied on a spool
ROPE CLUTCH, SPINLOCK, PXR SAIL TRACK CAR W/ CAM CLEAT CLEAT, SLIDING TRACK
CLEAT, SLIDING TRACK
Our Price: $52.00

This is the newest rope clutch which is used in our halyards aft kit. This replaces the older style PXO Clutch, which is no longer available.


This item was not a standard item on any MacGregor model but can be used on the Genoa tracks of many models. These are NOT intended to replace the standard genoa cars, but rather to be placed at the aft end of the track to allow the driver to easily cleat off the Genoa or Spinnaker sheets in lighter wind conditions that do not require the winches to be used. Spinnaker sheets can be run directly to these cars in light to medium wind.

These cars fit all MacGregors , Venture and Tattoo models that have standard 1” aluminum T-Track, some older model boats had smaller 7/8” stainless steel or aluminum track, these will not fit those tracks.


Fits all 1" track on Macgregor and Venture boats. Length of cleat is 7".
MAST STEP, ONE PIECE, VERTICAL SLOT MAST STEP, HALYARD ORGANIZER PLATE WINCH HANDLE, FLOATING
WINCH HANDLE, FLOATING
Our Price: $35.00

This mast base is approximately 4" tall and has a long vertical slot in each side for the mast base bolt. Used on all keelboats as well as a few M19s and 26Cs in 1992 and 1993. Can be upgraded to newer hinged style mast base by using part #3438-1X0 znd 3439-1X0.
This stainless plate goes under the existing mast deck plate on all MacGregor and Venture boats except the 26M and Daggerboard versions of the 26 Classic, for those boats use part # 3433-1M4. On late model 26 Classic boats, all 26X models and any boat that has had the mast deck plate updated to the newer 26X style, the pre drilled holes in the organizer plate should line up with the existing bolt holes on your boat. On older boats the bolt pattern for the mast deck plate varied, so you will likely need to drill holes in the new organizer plate to match your boat. The "wings" on each side offer three holes for attaching blocks to run halyards through. This is a great addition to add to our halyards led aft setup, or a boom vang led aft.

This part number is just for the bottom-most plate, the pictures of the blocks and the whole assembly are only to show how it is all assembled. You have the option on this part to add the blocks shown in the pictures. If you want to order those separately they are part number 3318-010.

This injection molded fiberglass nylon winch handle is made by way of air assist injection molding instead of foam filled method, thus preventing any potential leakage of foam from within the handle. Both sizes feature ball bearings in the handle to ensure smoother action under load. Fits Lewmar, Forespar, and all standard modern winches. Some early Venture models had winches that use a flat winch handle inserted from the side of the winch, those handles are no longer made.

CLEAT, CAM, HARKEN CARBO-CAM BALL BEARING CLEAT CAM, RONSTAN MAST STEP, HINGED, DECK PLATE ONLY, 26X
CLEAT CAM, RONSTAN
Our Price: $31.00

Used for jib sheets or furling control line on most macgregors, not factory standard, will match factory mounting holes, but will not match cosmetically. Older boats used a variety of cleat styles, to match 1995 and newer boats exactly, use part # 4202-1V0. These cam cleats hold lines securely and release instantly for easy, precise trimming. Multiple rows of high-load ball bearings to reduce friction and V-shaped line entry allow cams to open easily for snap-down, rather than draw-through, cleating.

Ronstan cam cleat, factory replacment for boats 1995 and newer. Fits but does not match cosmetically on older boats.
Deck plate for hinged mast step - standard on late 26C and 26X. Upgrade for any boat except 26M and 26C-daggerboard boats.
MAST STEP, HINGED, MAST FOOT ONLY, 26X BLOCK, SINGLE, HALYARD ORGANIZER W/ SWIVEL CHAINPLATE, BOW / SIDE
CHAINPLATE, BOW / SIDE
Our Price: $24.00
Mast foot for hinged mast step. This is the part of the hinged mast base that bolts directly to the mast. Standard on late 26C, most M19, and 26X. Upgrade for any boat but 26M. Single stainless block with swivel attachment. These ball bearing blocks work great for the halyard organizer plate for 26C, 26X and other boats. You can also use these on the newer style side angles (the ones with the block holes) on 26M , 26D and Tattoo boats.
Bow and side chain plate with 2 attachment holes and 3 bolt holes, used as bow chainplate on 26X but not 26M, also stern chainplate for 26C. May need to be cut off and redrilled to work on older boats with shorter chainplates.
CLEAT, CLAM, ALUMINUM BOW EYE BLOCK, SINGLE, CARBO AIRBLOCKS
CLEAT, CLAM, ALUMINUM
Our Price: $20.10
BOW EYE
Our Price: $19.50

An upgrade over our standard plastic clam cleats.
Used on the end of the boom for our single line reefing kit as well as our outhaul kit. Can be screwed or pop-riveted, Accepts 1/8" - 1/4" line.

Trailering bow eye with nuts and washers. May be different from stock fitting on older boats. Early style fittings are no longer available.

We use this block in our Macstack Lazy Jack/Main cover system but it could be used for many other things as well. Mounts to fiberglass or mast/boom using #8 sheet metal screws. Max working load of 330lbs and max line size is 5/16". Ball bearing block.

Long glass fiber injection molded • Used for outhauls, traveler controls, barberhauls, flag halyards and cunninghams
STUD, PELICAN HOOK, LEFT HAND THREAD HAND CRIMP STUD, PELICAN HOOK, RIGHT HAND THREAD HAND CRIMP DOCK LINE, 3/8" x VARIOUS LENGTHS

Has 1/4-28 left hand thread as used on C.S. Johnson style pelican hooks. Must be crimped using nicopress crimp tool with a "C" cavity, do not use swage-it style tool. Not for use in standing rigging, lifelines only!

Has 1/4-28 right hand thread as used on ABI and Hayne style pelican hooks. Must be crimped using nicopress crimp tool with a "C" cavity, do not use swage-it style tool. Not for use in standing rigging, lifelines only!

• 100% premium double braided nylon • Professionally spliced soft eye at one end • Yacht whipped at the bitter end and splice point • 3/8" and 1/2" diameter lines have a 12" eye length • 5/8" lines have a 15" eye length
HINGE, SMALL FLAT, 2 HOLE HINGE, OFFSET, PAIR FAIRLEAD, BLACK, STAINLESS INSERT
HINGE, SMALL FLAT, 2 HOLE
Our Price: $12.00
HINGE, OFFSET, PAIR
Our Price: $10.00

used for head doors, locker hatches, and many other applications over the years. Can be used to replace similar 3 hole hinge used on some boats. SAME AS #4802-1M0. Sold by the each.

Used for galley doors (26X) , head door (26X, M19) and many other places on various models. Same as A018-1V0.

Can be used anywhere a normal fairlead is installed. Stainless insert protects from line-wear over time. Screws to the deck with standard screws. DO NOT use for the lower rudder line guide on the 26X, that fairlead is designed as a "fuse" that will break if you hit something, this fairlead is too strong, use #4407-1V0.
CHAINPLATE, COVER CLEAT, MOORING PLASTIC TRACK, T-TRACK ENDS
CHAINPLATE, COVER
Our Price: $6.00
CLEAT, MOORING PLASTIC
Our Price: $5.95
TRACK, T-TRACK ENDS
Our Price: $4.70

Stainless trim piece placed around chainplate to provide water seal. Held on with 2 pop rivets.

This is a special order part. A few are in stock now but re-order time is slow. You can upgrade to the Stainless Steel cleat, part #4203-1V0.

PLASTIC T-TRACK ENDS THAT FIT JIB AND GENOA TRACKS ON ALL MACGREGORS
CLEAT, CLAM STRAPEYE, SMALL SHACKLE, 1/4" ANCHOR
CLEAT, CLAM
Our Price: $4.59
STRAPEYE, SMALL
Our Price: $3.50
SHACKLE, 1/4" ANCHOR
Our Price: $3.00

Used on the end of the boom for our single line reefing kit as well as our outhaul kit. Can be screwed or pop-riveted, Accepts 1/8" - 1/4" line.

Small strapeye, sometimes called a padeye but is really a strapeye as it does not have a baseplate. Mounts with 3/16" hardware.

1/4" Galvanized anchor shackle, screw pin style