Home > MacGregor Boat Parts > MacGregor 22 > Deck
Sort By:
Page of 1
WINCH KIT, SAIL, LEWMAR
Our Price: $308.00
WINCH KIT, SAIL, FORESPAR
Our Price: $208.00
ANCHOR LINE, 3/8" x 150'
Our Price: $91.00
Direct replacement for all boats since mid 1980's, premium upgrade for earlier boats or late model 26M with plastic Forespar winches. Includes two winches. Does not include winch handle. Order #4502-110 winch handle if you need a new one. Basic, Economical replacement for all boats since mid 1980's (came with Lewmar Aluminum #6's) - upgrade for earlier boats with out of date winches. • 3-strand, premium nylon construction provide excellent elongation to help minimize the shock load effects of waves and wind on deck hardware
• Thimble will not rust or chafe in the line, and may be attached to any galvanized or stainless shackle for use with anchors or chain
• Sizes 3/8" x 100 ft through 1/2" x 150 ft are supplied in a reusable plastic tote box; larger sizes are supplied on a spool
CLEAT, SLIDING TRACK
Our Price: $50.00
A Series 25 masthead light and functional halogen foredeck lamp combined into a single fixture. Bulbs are operated independently of each other.
• Masthead bulb: 12 volt/10 watts
• Foredeck bulb: 12 volt/20 watt halogen
• Housing made of rigid, saltwater resistant and non-magnetic polycarbonate
• 2 hole mounting on flexible flange which wraps around mast
• USCG certified; 2 nautical mile visibility
• Dimensions: 7"W x 5.5"H x 2.4"D
This is the newest rope clutch which is used in our halyards aft kit. This replaces the older style PXO Clutch, which is no longer available.
Fits all 1" track on Macgregor and Venture boats. Length of cleat is 7".
WINCH HANDLE, SAIL
Our Price: $32.60
CLEAT CAM, RONSTAN
Our Price: $28.00
CLEAT CAM, HARKEN
Our Price: $27.00
Fits all boats except very early Venture models which used a flat bar style winch handle, which is no longer available. Fits all Lewmar and Forespar winches. Ronstan cam cleat, factory replacment for boats 1995 and newer.  Fits but does not match cosmetically on older boats. Used for jib sheets or furling control line on most macgregors, not factory standard, will match factory mounting holes, but will not match cosmetically.  Older boats used a variety of cleat styles, to match 1995 and newer boats exactaly, use part # 4202-1V0.
CHAIN PLATE, BOW / SIDE
Our Price: $22.00
BOW EYE
Our Price: $18.50
Bow and side chain plate with 2 holes for all but M19, 26X and 26M, also stern chainplate for 26C.  May need to be cut off and redrilled to work on older boats with shorter chainplates. Trailering bow eye with nuts and washers.  May be different from stock fitting on older boats. Early style fittings are no longer available. We use this block in our Macstack Lazy Jack/Main cover system but it could be used for many other things as well. Mounts to fiberglass or mast/boom using #8 sheet metal screws. Max working load of 330lbs and max line size is 5/16". Ball bearing block.

Long glass fiber injection molded • Used for outhauls, traveler controls, barberhauls, flag halyards and cunninghams
CLEAT, CLAM, ALUMINUM
Our Price: $14.00
An upgrade over our standard plastic clam cleats. Used on the end of the boom for our single line reefing kit as well as our outhaul kit. Can be screwed or pop-riveted, Accepts 1/8" - 1/4" line. • 100% premium double braided nylon
• Professionally spliced soft eye at one end
• Yacht whipped at the bitter end and splice point
• 3/8" and 1/2" diameter lines have a 12" eye length
• 5/8" lines have a 15" eye length
Used on all boats, hasp is shipped straight, you will need to bend to shape for your specific boat. STRAPEYE ALSO INCLUDED.
HINGE, OFFSET, PAIR
Our Price: $10.00
HINGE, SMALL FLAT, 2 HOLE
Our Price: $10.00
CHAIN PLATE, COVER
Our Price: $6.00
Used for galley doors (26X) , head door (26X, M19) and many other places on various models.  Same as A018-1V0. used for head doors, locker hatches, and many other applications over the years.  Can be used to replace similar 3 hole hinge used on some boats. SAME AS #4802-1M0 Stainless trim piece placed around chainplate to provide water seal. Held on with 2 pop rivets.
CLEAT, CLAM
Our Price: $4.59
TRACK, T-TRACK ENDS
Our Price: $4.00
Can be used anywhere a normal fairlead is installed. Stainless insert protects from line-wear over time. Screws to the deck with standard screws. Used on the end of the boom for our single line reefing kit as well as our outhaul kit. Can be screwed or pop-riveted, Accepts 1/8" - 1/4" line. PLASTIC T-TRACK ENDS THAT FIT JIB AND GENOA TRACKS ON ALL MACGREGORS
STRAPEYE, SMALL
Our Price: $3.50
SHACKLE, 1/4" ANCHOR
Our Price: $2.00
Small strapeye, sometimes called a padeye but is really a strapeye as it does not have a baseplate. Mounts with 3/16" hardware. Peel and stick bulb style gasket used by macgregor since mid 1990 and recommended for replacement on all boats.  A huge improvement over the foam gasket used on older boats.  To see the measurements for your boat click on the "Extended Information" tab. Sold priced per foot. 1/4" Galvanized anchor shackle, screw pin style
Used on most boats to lead lines in various applications.  Also used to lead rudder control lines on 26X and lead furler control line to cockpit. Not sure what MacGregor parts to get for someone? Give the open ended gift of a Blue Water Yachts gift certificate. They never expire and are good for anything in our online store. NO LONGER AVAILABLE, REPLACE WITH NEW STYLE PXR CLUTCH. USE BWY# 4601-1V3
This Part is no longer available, recommend upgrading to Stainless Steel cleat, part #4203-1V0.