Home > MacGregor Boat Parts > MacGregor 26 Centerboard (1990-1995) > Sails > Jibs (105% or Less)
Sort By:
Page of 1
Gift Certificate WHISKER POLE, HEADSAIL CANVAS, GENOA/JIB COVER, 26C
WHISKER POLE, HEADSAIL
Our Price: $139.00
CANVAS, GENOA/JIB COVER, 26C
Our Price: $209.00
Sale Price: $199.00
Savings: $10.00

Not sure what MacGregor parts to get for someone? Give the open ended gift of a Blue Water Yachts gift certificate. They never expire and are good for anything in our online store! Let us know how much you would like for your certificate and we can make it out for any price.



We recommend this telescoping pole (6'-12') for all Macgregor models. While Forespar says to use a larger size, we have found that the larger pole is too heavy to use in light wind without the complexity of a pole lift line. An added benefit is that if you completely lose control of things in a big blow, the plastic end fitting will break, acting as a sort of "fuse". These fittings are inexpensive and easy to replace. We stock these poles with latch fittings on both ends as we have found the "spike" style poles tend to come out of the sail grommet if the sail shakes a lot or goes slack. Instead latch securely onto the leeward sheet.

Everything is included in this kit for all boats except for 26M. If you have a 26M you must add the additional mast padeye bracket.

Because of the length this item ships oversize, and is subject to an additional $25 shipping charge. If we are able to get a cheaper shipping rate we will manually adjust your invoice accordingly.

Sunbrella canvas jib or genoa cover to protect your sail from UV rays and dirt when not in use or when trailering. Built with 3 zippers so you can wrap it around your sail and hoist it with a jib halyard. Sheets can come through at the third zipper or can be protected in in cover. Black, Grey, Pacific Blue or Ocean Blue are standard colors, all other colors non-refundable. The black color is usually in stock, all other colors please allow 2 to 3 weeks lead time, especially during busy season Can be made with flutter control for additional $50. See part number 2308-1V0

PLEASE CALL IF YOU'D LIKE A COLOR THAT IS NOT LISTED. COLORS CAN BE FOUND ON THE SUNBRELLA CANVAS WEBSITE.

LINK HERE--
Sunbrella Canvas Colors
CANVAS, GENOA/JIB COVER, FLUTTER CONTROL JIB, HANK, CLASSIC, UPGRADE REPLACEMENT JIB, RF NO UV, CLASSIC, COASTAL CRUISING / PERFORMANCE

Sunbrella Jib or Genoa Covers that have small tabs sewn on to lace a string through. You will pull the string tight to prevent the cover from flapping in the wind. These small strings overlap like a shoe lace on the opposite side of the zippers, but they can tangle if you are not careful handling it! This is especially good on moored boats. Built with 3 zippers, just wrap the cover around your sail and hoist it with your jib halyard. Black, Grey, Pacific Blue or Ocean Blue are standard colors but other colors can be special order. All special orders non-refundable. Canvas orders may take 2-3 weeks to have them made.

PLEASE CALL IF YOU'D LIKE A COLOR THAT IS NOT LISTED. COLORS CAN BE FOUND ON THE SUNBRELLA CANVAS WEBSITE.

LINK HERE--
Sunbrella Canvas Colors
Hank-on / 5.0 Dacron

A definite upgrade from your old factory sails, but still very reasonably priced. Made with high quality 5 OZ High Modulus Dacron in a cross cut design. These sails feature a hydraulically pressed stainless steel ring for the clew, and reinforced nylon webbing for the head and tack to allow a strong but flexible connection.

While slightly heavier and stiffer to handle than the factory sails, this sail will last much longer, perform better through a larger wind range (your boat will go faster and heel less), and hold their shape better in high winds than the factory sails so you won't have to reef as often. This is a 100% Jib, the sail does not reach past the mast. The larger sail that reaches past the mast is called a Genoa. With brass pull style Hanks to attach to your headstay. Please call if you have questions.

Roller Furling, 5.5 Dacron / NO UV Cover

Roller Furling ready with #6 luff tape, for CDI furling units and other units with that size. The 100% Jib rolls out to reach the mast but does not go past. Can be rolled and used smaller. The Jib allows you to sail closer to the wind, point higher, and tack faster than the genoa sail (larger reaching past the mast). The heavier weight will give you good performance and hold its shape longer than the standard factory sail which is much lighter weight. Easy to use. This sail has no UV cover and we recommend purchasing the hoist up style jib cover for it. Without UV protection you will need to remove the sail when you are finished sailing and store out of the sun. Or easily pull up the hoist on sock / jib cover. (picture shows a jib, but not on the classic)

These sails feature a hydraulically pressed stainless steel ring for the clew, and reinforced nylon webbing for the head and tack to allow a strong but flexible connection to your furler.

"ALMOST NEW" JIB, HANK, CLASSIC, UPGRADE REPLACEMENT JIB, RF W/ UV, CLASSIC, COASTAL CRUISING / PERFORMANCE JIB, HANK, CLASSIC, CUSTOM
JIB, HANK, CLASSIC, CUSTOM
Our Price: $995.00
Hank-on / 5.0 Dacron

This is a barely used sail, purchased from us about a year ago and flown once or twice. It will fit the 26C or M25/V25

A definite upgrade from your old factory sails, but still very reasonably priced. Made with high quality 5 OZ High Modulus Dacron in a cross cut design. These sails feature a hydraulically pressed stainless steel ring for the clew, and reinforced nylon webbing for the head and tack to allow a strong but flexible connection.

While slightly heavier and stiffer to handle than the factory sails, this sail will last much longer, perform better through a larger wind range (your boat will go faster and heel less), and hold their shape better in high winds than the factory sails so you won't have to reef as often. This is a 100% Jib, the sail does not reach past the mast. The larger sail that reaches past the mast is called a Genoa. With brass pull style Hanks to attach to your headstay. Please call if you have questions.

Roller Furling, 5.5 Dacron / White Dacron UV cover

Roller Furling ready with #6 luff tape, fits CDI furling units and other units of that size. The 100% Jib will roll out to reach the mast, but does not reach past. For the larger sail you will need the 150% Genoa. The jib will give you quicker and easier tacks, and allow you to sail into the wind, point, higher than the genoa. This sail has a white UV cover, but we recommend for long term storage to use the hoist up sock / genoa cover to protect it from sun exposure and to protect it while trailering.
(picture shows a jib sail, but not on a classic)

These sails feature a hydraulically pressed stainless steel ring for the clew, and reinforced nylon webbing for the head and tack to allow a strong but flexible connection to your furler.

This is a BWY Exclusive sail, and is typically in our inventory and available to ship.

Hank-on / Dacron Cruise Laminate / Tri Radial Cut

Our premium sail offering for cruising or racing. These sails use laminate sail cloth with a light taffeta on each side to provide the durability of a 7.4 OZ Dacron sail, but without the weight and handling difficulty. The laminate cloth used in these sails has about the same weight and handling ease as a 5 or 5.5 OZ Dacron sail. Built with a Tri-Radial design that gives great performance and a very racy look! Because these sails are made to order, many options are available, call for specific prices and to consult with a BWY expert to help you configure your sail just the way you want it.

These sails feature a hydraulically pressed stainless steel ring for the clew, and reinforced nylon webbing for the head and tack to allow a strong but flexible connection.

(picture shows a roller fruling tri-radial design, but not on a classic). You can order this sail with either the standard push style brass hank, or the snap brass hank for an additional $100.)
JIB, RF UV OPTIONAL, CLASSIC, CUSTOM
Roller Furling / Dacron Cruise Laminate / Tri Radial Cut / UV Optional

Our premium sail offering for cruising or racing. These sails use laminate sail cloth with a light taffeta on each side to provide the durability of a very heavy woven Dacron sail, but without the weight and handling difficulty. The laminate cloth used in these sails has the strength of 7.4 OZ woven Dacron but with the weight and handling ease of a 5 or 5.5 OZ sail. Our Custom jibs use a tri-radial design for improved performance and a really racy look! Can be ordered with a White UV Dacron suncover or your choice of Sunbrella Cloth colors, although at this performance level we recommend using a pull up sock type cover that provides both UV protection and damage protection while trailering without the negative effects on sail shape caused by sewn on covers. Because these sails are made to order, many options are available, call for specific prices and to consult with a BWY expert to help you configure your sail just the way you want it. This is a custom product which typically takes 2-4 weeks in the off-season and up to 6 weeks during our busy season.

These sails feature a hydraulically pressed stainless steel ring for the clew, and reinforced nylon webbing for the head and tack to allow a strong but flexible connection to your furler.


   
 
Sail Buying Guide