Home > MacGregor Boat Parts > MacGregor 26X (1995-2003) > Convenience & Safety
Sort By:
Page of 1
TABLE, COCKPIT, W/PEDESTAL GUARD, 26X LADDER, SIDE BOARDING MAST RAISING SYSTEM, CURRENT WITH WINCH FOR ALL BUT 26M
LADDER, SIDE BOARDING
Our Price: $319.00

also called BINNACLE table for 26x. Polished stainless hoop like binnacle guard but also attaches to floor. Has hinge up white table with hardware. ALSO INCLUDES mainsheet Loop ON TOP.
Side boarding ladder slides onto genoa tracks, easily moved from one side to the other by just sliding the ladder off and then onto the other track, or you can leave the brackets on the track and remove the ladder by pulling the quick pins. This is a nice addition to your 26M or 26X, this is very popular!

We will combine shipping when we can on this item but often times the ladder must ship separately due to its odd size/shape.

Starting April 2019 the step treads on the ladders are now a light grey, as seen in the last two photos. White step treads are not available right now. The pictures showing the white treads are just to illustrate the use of the ladder.

We sometimes run long back-orders on this item, up to about 6 weeks, so please order far ahead of time.

This is the newer winch style mast raising system for use on all MacGregor and Venture boats except the 26M. This system can be used if you don't have a mast raiser at all or if you want to update a block and tackle style system to the newer winch style.

Most boats will need some additional hardware, especially if you don't have any mast raiser at all now. Be sure to read the "Extended Information" section before you order! If the wrong parts are ordered from the drop-down options the customer will be responsible for return shipping charges and the shipping of the correct parts.

If you have an existing block and tackle style mast raiser and want to upgrade to the winch style, order our retrofit kit, part #3464-1V4


This system is very specific to the MacGregor Mast and MacGregor hardware and is not sold for or intended to be used on other brands of boats.


MAST RAISING SYSTEM, WINCH STYLE RETROFIT KIT LIFELINE GATES CANVAS, ORGANIZER, MISCELLANEOUS
LIFELINE GATES
Our Price: $119.00

This kit includes all the parts you will need to convert an existing block and tackle style mast raiser to the newer winch style. You will need a good mast raising pole with all of its standard hardware and your existing side support wire assemblies to make this kit work. If you do not have a good pole order the complete kit, part #3418-1M0 for the 26M or #3418-1V0 for all other MacGregor or Venture boats.

Installation of this kit requires that you drill 2 new holes in the mast raising pole to mount the winch and 1 hole in the mast for the mast raising bail.

Are you tired of trying to get over the cockpit lifelines when docking? This will allow you to quickly release the lifeline to get it out of your way.
These Kits now include 2 complete new rear lifelines, allowing you to install them with no tools.

Sunbrella canvas with screen mesh front.
NO LONGER AVAILABLE


CANVAS, ORGANIZER, GALLEY CANVAS, ORGANIZER, HEAD TRANSOM FILLER, BRACKETS AND PANEL, 26X
CANVAS, ORGANIZER, GALLEY
Our Price: $89.00
CANVAS, ORGANIZER, HEAD
Our Price: $89.00

Sunbrella cloth storage organizer that attaches to a wall or bulkhead with velcro. Has pockets for cups and larger pockets for plates or paper towels. This is a nice convenient way to stow those difficult galley items. Stocked in black. Other colors special order and non refundable.

PLEASE CALL IF YOU'D LIKE A COLOR THAT IS NOT LISTED. COLORS CAN BE FOUND ON THE SUNBRELLA CANVAS WEBSITE.

LINK HERE--
Sunbrella Canvas Colors

Sunbrella cloth storage organizer that attaches to a wall or bulkhead with Velcro. The top portion is mesh with elastic pocket for small items, chapstick, fingernail clippers, etc. The other pockets are great for TP, sunscreen, and general stuff!

PLEASE CALL IF YOU'D LIKE A COLOR THAT IS NOT LISTED. COLORS CAN BE FOUND ON THE SUNBRELLA CANVAS WEBSITE.

LINK HERE-- Sunbrella Canvas Colors

All colors other than black are non-refundable.
Fills the space underneath the captains chair to cut down on noise and also keep items from sliding away and into the engine well. Installs with included stainless screws. You will also want some marine sealant to seal the screw holes. Note: The picture is of a transom filler on a 26M. The 26X transom filler will be larger and will fill the whole space of the wider transom.
These panels are fairly large and require additional shipping charges. Our shipping calculator may not get the amount right, if this is the case we will contact you to complete the correct payment.

If you have a 26M, your transom filler can be found here.
TRANSOM FILLER, PANEL ONLY, 26X CANVAS, PROP COVER GRAB HANDLE, 3 HOLE
CANVAS, PROP COVER
Our Price: $55.00
GRAB HANDLE, 3 HOLE
Our Price: $54.00
Fills the space underneath the captains chair to cut down on noise and also keep items from sliding away and into the engine well. This is the PANEL ONLY, you will not receive the mounting brackets. This 26X transom filler is large and will fill the whole space of the wider transom.
These panels are fairly large and require additional shipping charges. Our shipping calculator may not get the amount right, if this is the case we will contact you to complete the correct payment.

If you have a 26M, your transom filler can be found here.

This bright red cover fits Suzuki 50/60/70 3 blade props. Has reflector strip. Improves safety on the highway and protects the prop from minor damage. Used for trailering only.


Can be used for swim ladder grab handle on 26X or 26M, use screws and 3M5200 to attach. Can be used elswhere on other boats but may need to be through bolted.
DRINK HOLDER, CONVERTIBLE SINGLE OR DOUBLE CLEAT, CAM, HARKEN CARBO-CAM BALL BEARING LIFE VEST, ADULT SIZE
LIFE VEST, ADULT SIZE
Our Price: $20.00
There are two sizes available for this cup holder. It can mount to any vertical rail or stanchion and can be used as a single drink holder, or it folds out for two! Easy to install and remove with just a screwdriver.  The available rail sizes are 1" and 7/8".  Most MacGregor Stanchions and 26M stern rail seats are 1" the Blue Water Yachts Pedestal Guards will be 7/8" except for the 26X Cockpit table which is 1".  To be sure you need to measure the rail you want the cup holder to fit!  Just put a tape measure behind it and look on both side to line it up, it should be easy to tell which you have.
Used for jib sheets or furling control line on most macgregors, not factory standard, will match factory mounting holes, but will not match cosmetically. Older boats used a variety of cleat styles, to match 1995 and newer boats exactly, use part # 4202-1V0. These cam cleats hold lines securely and release instantly for easy, precise trimming. Multiple rows of high-load ball bearings to reduce friction and V-shaped line entry allow cams to open easily for snap-down, rather than draw-through, cleating.

USCG Approved Type III PFD
• Durable nylon outer shell; poly-twill inner • Adjustable belts and chest strap to keep vest from riding up • Lightweight, durable flotation foam • Open-sided styling
MAST BASE, QUICK PIN WINE GLASS HOLDER BOW PIN
MAST BASE, QUICK PIN
Our Price: $12.00
WINE GLASS HOLDER
Our Price: $9.00
BOW PIN
Our Price: $8.00

This replaces the 3/8" bolt at the mast base with a pin without any threads. This makes it slide in and out much easier. One end of the pin has a ring welded on it and the other has an easy to remove split pin. On the 26M we occasionally find rough spots inside the mast base plate tube that will need to be filed down with a round file to use this pin.

This wine glass holder can mount to any vertical rail or stanchion. Easy to install by snapping it on and off the rail, or install with the supplied retainer hoop for a more permanent mounting.
The available rail sizes are 1" and 7/8". Most MacGregor Stanchions and 26M stern rail seats are 1" the Blue Water Yachts Pedestal Guards will be 7/8" except for the 26X Cockpit table which is 1". To be sure you need to measure the rail you want the cup holder to fit! Just put a tape measure behind it and look on both side to line it up, it should be easy to tell which you have.

This is a much easier and less frustrating pin to use for attaching the headstay (or furler) to the bow chain plate. It is 1 1/2" long and has about a 1" head, so it is easy to hold/handle. Some headstay turnbuckles have a metric hole (6mm) which will need to drilled out just a little to 1/4" size, this takes just a minute. NEVER USE A STRAIGHT QUICK PIN OR "BALL LOCK" TYPE PIN ON YOUR HEADSTAY. THEY WILL FALL OUT AND YOUR MAST WILL COME DOWN!!
BALLAST, TANK DIPSTICK TUBE QUICK PIN, 1/4" X 1" Gift Certificate
QUICK PIN, 1/4" X 1"
Our Price: $3.50
Dipstick tube to measure how much water is in your ballast tank.
Replace canvas attachment screws with this easy to remove quick pin. 1/4" diameter x 1" length. The canvas mounting "feet" will need to be drilled out to 17/64" to use these pins. Do not use for rigging or forestay pin.

Not sure what MacGregor parts to get for someone? Give the open ended gift of a Blue Water Yachts gift certificate. They never expire and are good for anything in our online store! Let us know how much you would like for your certificate and we can make it out for any price.


QUICK RIG KIT - CUSTOM


A fully equipped MacGregor can easily become a project to rig if you don't have your boat set up properly for easy rigging. This kit can cut rigging time in half for some boats, and reduces frustration levels by more than that!

Below is our recommendation for what we would put in a complete quick rig kit, but you can customize it however you want.

- 4 stainless steel snap shackles to add to the bottom of your mainsheet, boom vang, and mast raising kit, as well as on your jib halyard where it attaches to the top of the mast raising pole. We recommend 1 swivel snap shackle and 3 fixed.

- 2 easy to hold headstay pins (yes, you even get a spare) so that you don't have to struggle with the tiny clevis pin to attach your headstay to the bow. A word of warning: NEVER use a quick release or ball-lock pin for your headstay! They WILL fall out causing your mast to fall!

- 8 1/4" x 1" quick pins. These are great replacements for the screws at the mounting bases for dodgers and biminis, as well as lots of other applications for 1/4" bolts. A bimini will require 2 quick pins and a dodger will require 6.

- A pelican hook for your Starboard forward lifeline. This allows you to release your lifeline quickly and easily while trailering so that you don't need to tuck the spreaders under the lifelines. You will have to borrow a heavy duty Nicopress tool to crimp these, or you can send your lifelines to us and we can do it for you.

-
2 mast base quick pins. These take the place of the 4" or 4 1/2" bolts that secure the mast base plate to the deck plate, or the mast to the deck plate depending on which boat you have. You can put away the 9/16" wrenches if you get one of these, no more struggling with those nylock nuts and bolts. We recommend 2 just because it's nice to have a spare.