Home > MacGregor Boat Parts > MacGregor 19 (1992-1995) > Convenience & Safety
Sort By:
Page of 1
EXTENDED LIFELINES
Our Price: $99.00
Newer winch style mast raising system for updating a block and tackle style system to the winch style. Can be retrofitted to older MacGregor & Venture boats without a mast raiser by adding additional parts.
There are a number of parts you may need to add to the kit depending on your boat. This is very specific to the MacGregor Mast and MacGregor hardware. Not intended or sold to other brands of boats. Please click on "Extended information".


This kit allows you to extend the lifelines to attach to your stern railing. The Vinyl coated stainless steel lifelines have solid stainless gate hooks for easy boarding from docks. Stern Rails and cabin top rails were not standard as new from the factory, but in order to have lifelines you would need both. Unfortunately, both the M19 stern rail and cabin top rails are no longer available.

This package does require a "Nicopress" swaging tool and a cable cutter for installation. Most marine supply stores loan or rent professional tools, or you can buy your own do-it-yourself tool from us.

No longer available.
SUNBRELLA CANVAS WITH SCREEN MESH FRONT.


CANVAS, ORGANIZER, GALLEY
Our Price: $89.00
CANVAS, ORGANIZER, HEAD
Our Price: $89.00
Sunbrella cloth storage organizer that attaches to a wall or bulkhead with velcro. Has pockets for cups and larger pockets for plates or paper towels. This is a nice convenient way to stow those difficult galley items. Stocked in black. Other colors special order and non refundable.

PLEASE CALL IF YOU'D LIKE A COLOR THAT IS NOT LISTED. COLORS CAN BE FOUND ON THE SUNBRELLA CANVAS WEBSITE.
Sunbrella cloth storage organizer that attaches to a wall or bulkhead with Velcro. The top portion is mesh with elastic pocket for small items, chapstick, fingernail clippers, etc. The other pockets are great for TP, sunscreen, and general stuff!

PLEASE CALL IF YOU'D LIKE A COLOR THAT IS NOT LISTED. COLORS CAN BE FOUND ON THE SUNBRELLA CANVAS WEBSITE. All colors other than black are non-refundable.
There are two sizes available for this cup holder. It can mount to any vertical rail or stanchion and can be used as a single drink holder, or it folds out for two! Easy to install and remove with just a screwdriver.  The available rail sizes are 1" and 7/8".  Most MacGregor Stanchions and 26M stern rail seats are 1" the Blue Water Yachts Pedestal Guards will be 7/8" except for the 26X Cockpit table which is 1".  To be sure you need to measure the rail you want the cup holder to fit!  Just put a tape measure behind it and look on both side to line it up, it should be easy to tell which you have.
CLEAT CAM, HARKEN
Our Price: $27.00
LIFE VEST, ADULT SIZE
Our Price: $20.00
MAST BASE, QUICK PIN
Our Price: $11.00
Used for jib sheets or furling control line on most macgregors, not factory standard, will match factory mounting holes, but will not match cosmetically.  Older boats used a variety of cleat styles, to match 1995 and newer boats exactaly, use part # 4202-1V0. USCG Approved Type III PFD
• Durable nylon outer shell; poly-twill inner

• Adjustable belts and chest strap to keep vest from riding up
• Lightweight, durable flotation foam
• Open-sided styling
This replaces the 3/8" bolt at the mast base with a pin without any threads. This makes it slide in and out much easier.  One end of the pin has a ring welded on it and the other has  an easy to remove split pin.  On the 26M we occasionally find rough spots inside the mast base plate tube that will need to be filed down with a round file to use this pin.
WINE GLASS HOLDER
Our Price: $9.00
BOW PIN
Our Price: $6.00
This wine glass holder can mount to any vertical rail or stanchion. Easy to install by snapping it on and off the rail, or install with the supplied retainer hoop for a more permanent mounting. The available rail sizes are 1" and 7/8". Most MacGregor Stanchions and 26M stern rail seats are 1" the Blue Water Yachts Pedestal Guards will be 7/8" except for the 26X Cockpit table which is 1". To be sure you need to measure the rail you want the cup holder to fit! Just put a tape measure behind it and look on both side to line it up, it should be easy to tell which you have. This is a much easier and less frustrating pin to use for attaching the headstay (or furler) to the bow chain plate.  It is 1 1/2" long and has about a 1" head, so it is easy to hold/handle.  Some headstay turnbuckles have a metric hole (6mm) which will need to drilled out just a little to 1/4" size, this takes just a minute.  NEVER USE A STRAIGHT QUICK PIN OR "BALL LOCK" TYPE PIN ON YOUR HEADSTAY. THEY WILL FALL OUT AND YOUR MAST WILL COME DOWN!! Not sure what MacGregor parts to get for someone? Give the open ended gift of a Blue Water Yachts gift certificate. They never expire and are good for anything in our online store.

A fully equipped MacGregor can easily become a project to rig if you don't have your boat set up properly for easy rigging. This kit can cut rigging time in half for some boats, and reduces frustration levels by more than that!

Below is our recommendation for what we would put in a complete quick rig kit, but you can customize it however you want.

- 4 stainless steel snap shackles to add to the bottom of your mainsheet, boom vang, and mast raising kit, as well as on your jib halyard where it attaches to the top of the mast raising pole. We recommend 1 swivel snap shackle and 3 fixed.

- 2 easy to hold headstay pins (yes, you even get a spare) so that you don't have to struggle with the tiny clevis pin to attach your headstay to the bow. A word of warning: NEVER use a quick release or ball-lock pin for your headstay! They WILL fall out causing your mast to fall!

- 8 1/4" x 1" quick pins. These are great replacements for the screws at the mounting bases for dodgers and biminis, as well as lots of other applications for 1/4" bolts. A bimini will require 2 quick pins and a dodger will require 6.

- A pelican hook for your Starboard forward lifeline. This allows you to release your lifeline quickly and easily while trailering so that you don't need to tuck the spreaders under the lifelines. You will have to borrow a heavy duty Nicopress tool to crimp these, or you can send your lifelines to us and we can do it for you.

-
2 mast base quick pins. These take the place of the 4" or 4 1/2" bolts that secure the mast base plate to the deck plate, or the mast to the deck plate depending on which boat you have. You can put away the 9/16" wrenches if you get one of these, no more struggling with those nylock nuts and bolts. We recommend 2 just because it's nice to have a spare.