Home > Venture Boat Parts > Venture 23
Sort By:
Page of 5
ROLLER FURLING, CDI KEEL, SWING MAST, BARE EXTRUSION, 3" X 4" X 24'
ROLLER FURLING, CDI
Our Price: $749.00
KEEL, SWING
Our Price: $695.00

This is the complete roller furling system for all MacGregor models. You will also need the deck hardware to lead the control line to the cockpit and a headstay compatible with the furler. We can provide you with both. Your headstay must have a standard turnbuckle at the bottom and a swaged threaded stud on the bottom end, not a loop. The luff is not returnable.

You also may be interested in the ball bearing upgrade for the furling drum. This is a replacement metal ball bearing. ALthough it's not a night and day" difference between the standard bearing and the ball bearing it is a nice upgrade and truly the only way to get maximum performance and ease of use out of the CDI flexible furler system.

We have a few replacement keels available, call for details.

Fits V21, V22, V222, V23. Does not have sail feed slot cut or any holes for hardware drilled. Must be shipped motor freight, call for quote, disregard quoted shipping on website. Masts are shipped in 2 pieces with a splice / reinforcement piece at the spreaders. Mast packaging fee: $150

Select appropriate options if you'd like the mast drilled for hardware installation and/or notched for the sail feed slot.

We recommend buying a new mast foot plate with a new mast so we can drill the holes to match up correctly.
BOOM, COMPLETE, KEELBOATS WINCH KIT, SAIL, LEWMAR ROLLER FURLING, CDI, LUFF ONLY
BOOM, COMPLETE, KEELBOATS
Our Price: $335.00
WINCH KIT, SAIL, LEWMAR
Our Price: $308.00

This boom fits all Venture and MacGregor models through 1987 except the V-24 and V-224 (these boats had an 11' long boom which is no longer available). We will cut to length for models with boom lengths under 10'. Must be shipped motor freight, expect high shipping charges and a $30 special packaging fee. The original size boom section is no longer available. We are using the same section as the mast, this will require that you also replace your boom end caps with the new part, boom end cap large. Please call if you have questions.

Direct replacement for all boats since mid 1980's, premium upgrade for earlier boats or late model 26M with plastic Forespar winches. Includes two winches. Does not include winch handle. Order #4502-110 winch handle if you need a new one.

The bronze winches are a nice upgrade, offering the same reliable functionality with a nicer aesthetic. If you upgrade to the bronze winches please allow an extra week for shipment, as they are a special order for us and take some time to get.

THIS LUFF FITS THE CDI UNIT ONLY. This is the plastic headfoil for the CDI, Cruising Design, roller furling units. This plastic luff is what the headsail rolls up onto, the headstay is inside. Has two groves, one on each side, for sail. Luff is not returnable.
In some cases the shipping charge may be higher than the estimate. We will contact you if this happens.
MAST RAISING SYSTEM, CURRENT WITH WINCH FOR ALL BUT 26M BOOM, BARE EXTRUSION, 10.5 FT LADDER, SWIM, PRE-95
LADDER, SWIM, PRE-95
Our Price: $229.00
DUE TO PARTS SUPPLY SHORTAGES, THIS ITEM WILL NOT SHIP UNTIL EARLY OCTOBER, IF YOU WANT ONE THEN, ORDER IT NOW TO BE ON THE LIST. This is the newer winch style mast raising system for use on all MacGregor and Venture boats except the 26M. This system can be used if you don't have a mast raiser at all or if you want to update a block and tackle style system to the newer winch style.

Most boats will need some additional hardware, especially if you don't have any mast raiser at all now. Be sure to read the "Extended Information" section before you order! If the wrong parts are ordered from the drop-down options the customer will be responsible for return shipping charges and the shipping of the correct parts.

This system is very specific to the MacGregor Mast and MacGregor hardware and is not sold for or intended to be used on other brands of boats.



Fits all boats except V24 and V224 which had an 11' boom, we can offer this length. This will need to be cut to length for all models 17' thru 24'. Must be shipped motor freight, expect high shipping charges and a $30 special packaging fee. We are using the same section as the mast, this will require that you also replace your boom end caps with the new part, boom end cap large. Please call if you have questions

fits 26 classic and all keel boats, as well as other brands of boats. Does not fit m19, 26X, or 26M
WINCH KIT, SAIL, FORESPAR STAY, BACKSTAY TENSIONER KIT STAY, BACKSTAY TENSIONER KIT, 24' MAST
WINCH KIT, SAIL, FORESPAR
Our Price: $208.00

Basic, Economical replacement for all boats since mid 1980's (came with Lewmar Aluminum #6's) - upgrade for earlier boats with out of date winches. This winch may be replaced with the Marelon winch by forespar, as this one may no longer be made.

Backstay tensioner kit for 26X, 26C, M25 and all keel boats with 28' tall mast. Includes new backstay cable with loop at top and bottom, 4:1 blocks and line. Attaches to existing your female shroud adjuster at stern chainplate, if your female adjuster is missing, you should order that also, part #3102-110.

Backstay tensioner kit for M19 and all keel boats with the 24' tall mast. Attaches to existing female shroud adjuster at stern chainplate, if your female adjuster is missing, you should order that also, part #3102-110.
BOOM VANG KIT, ALL BUT 26M PORTA POTTIE, W/MOUNTING BRACKET SPREADER, FIXED BASE, RETROFIT KIT
BOOM VANG KIT, ALL BUT 26M
Our Price: $159.00

This kit gives you all the blocks, line and hardware to install a Boom Vang on any Mac except the 26M (use kit 3301-1M0). Does not work with early boats equipped with the roller reefing boom when the sail is actually reefed. Most boats already have the holes drilled in the mast and boom for the attachment bolts. If yours does not, you will have to drill two 1/4" holes.

Porta Potty in 2.5 gallon holding tank and 2.3 gallon fresh water supply. Color: Parchment Tan. Includes mounting brackets. Top half is fresh water, bottom half for waste. Side latches lock firmly in place for added safety.

This is a great upgrade for any older boat with loose spreaders that can fold up against the mast. Greatly improves both the strength and stiffness of the rig, making it much easier to get good headstay tension. Improved headstay tension means improved upwind performance. Fits 3.5" X 4" teardrop style mast (1967 thru 2003). Most 26X models came with rigid spreaders standard, some early boats did not.
SINGLE LINE REEFING KIT KEEL, WINCH W/HANDLE BLOCK, DOUBLE, FIDDLE W/SWIVEL, BECKET, CAM CLEAT, SNAP SHACKLE
SINGLE LINE REEFING KIT
Our Price: $99.00
KEEL, WINCH W/HANDLE
Our Price: $95.00

This kit modifies the boom so you can reef the sail from the cockpit. Your mainsail must have slides and jacklines, or slides and a mast gate cover to work properly. With just slides and no jacklines or mast gate cover, you will need to remove 1 or 2 slides from the mast to reef. Works great with your halyards led aft to the cockpit. An easy way to update your old roller boom to a more modern system.


Many different styles of keel winches were used over the years. This model replaces all. Mounting holes in boat may need to be re-drilled. Winch is Zinc plated for corrosion resistance.

This block is normally used as lower end of mainsheet block. Just like the stock block but has a snap shackle for easy removal.
LAZY JACK KIT CANVAS, ORGANIZER, MISCELLANEOUS CANVAS, ORGANIZER, GALLEY
LAZY JACK KIT
Our Price: $89.00
CANVAS, ORGANIZER, GALLEY
Our Price: $89.00

Lazy Jack Lines are great for those who are looking for an easier way to contain the mainsail when it is lowered. This kit is good for all boats, and is a basic two leg system. While there are other multiple leg systems available we feel they become too difficult to raise the mainsail without tangling on battens. This two leg system will keep most of the mainsail on the boom when lowered, just finish containing the sail with a sail tie or two! Care must still be given when raising the mainsail so as not to catch the battens of the sail on the Lazy Jack lines.

Sunbrella canvas with screen mesh front.
NO LONGER AVAILABLE



Sunbrella cloth storage organizer that attaches to a wall or bulkhead with velcro. Has pockets for cups and larger pockets for plates or paper towels. This is a nice convenient way to stow those difficult galley items. Stocked in black. Other colors special order and non refundable.

PLEASE CALL IF YOU'D LIKE A COLOR THAT IS NOT LISTED. COLORS CAN BE FOUND ON THE SUNBRELLA CANVAS WEBSITE.

LINK HERE--
Sunbrella Canvas Colors
CANVAS, ORGANIZER, HEAD MAST RAISING SYSTEM, POLE ONLY 6 FT STAY, UPPER SHROUD, CUSTOM
CANVAS, ORGANIZER, HEAD
Our Price: $89.00

Sunbrella cloth storage organizer that attaches to a wall or bulkhead with Velcro. The top portion is mesh with elastic pocket for small items, chapstick, fingernail clippers, etc. The other pockets are great for TP, sunscreen, and general stuff!

PLEASE CALL IF YOU'D LIKE A COLOR THAT IS NOT LISTED. COLORS CAN BE FOUND ON THE SUNBRELLA CANVAS WEBSITE.

LINK HERE-- Sunbrella Canvas Colors

All colors other than black are non-refundable.

Aluminum pole only, no winch or hardware. Fits all boats with mast raising system except very late model M25 and very early 26C, which had a 9' pole. THIS POLE IS no longer available. These boats should be converted to the new 6' pole. Mast Raising System poles may not be available. Call for information. Ships by itself.

1/8" 1X19 stainless steel wire on all Mac 23ft and smaller. 5/32nd 1X19 stainless steel wire on 24ft to 26ft models. The end fittings vary on each boat. You must send in old shrouds so we can match the measurements and make sure everything has orginal factory hardware.

FURLER CONTROL KIT SPREADER BASE, FIXED, PAIR STAY, BACKSTAY, CUSTOM
FURLER CONTROL KIT
Our Price: $69.00
STAY, BACKSTAY, CUSTOM
Our Price: $69.00

Kit for cleanly running your roller furling line back to the cockpit. Includes 45' 3/16" line, four fairleads (like the two shown), and a cam cleat to mount on top of the deck. Hardware will depend on which boat you have, please let us know the year of your boat. The CDI Roller Furling Kit does not include this. But, if you are adding roller furling to your boat to be able to control the furling from the cockpit is a must!
Replacement fixed spreader sockets only, THIS PART NUMBER DOES NOT COME WITH THE SCREWS AND BOLT TO ATTACH IT
1/8" 1X19 stainless steel wire. You must send in your old shrouds so we can match the measurements and make sure everything has original factory hardware.

STAY, FORESTAY, RF, VARIOUS STAY, LOWER SHROUD, CUSTOM GOOSENECK, MAST AND BOOM ASSY

1 x 19 - 1/8 IN Stainless Steel wire. These are made to order for your boat. works with roller furling or hank on sails. *YOU MUST SEND US YOUR OLD STAY TO MATCH FACTORY MEASUREMENTS.*

1/8" 1X19 stainless steel wire. Found on all Mac 23ft and smaller and 5/32nd 1X19 on 24ft to 26ft models. The end fittings vary on each boat model. You must send in old shrouds so we can match the measurements and make sure everything has orginial factory hardware.



Current style used on the 26M. Boats older than 1997 need to update to new boom end cap (3405-113) also.